RED DSMC V5.2 Especificações descarregar pdf (Página 175)

RED DSMC OPERATION GUIDE

HD-SDI OUT

A standard 75 ohm BNC connector provides the following output:

 Broadcast specification HD-SDI video output (default mode is Clean)

 Two (2) channels of embedded audio

 Time of Day and Edge timecode

 Record Tally flag

 Clip name information (as SMPTE RP-188 VITC2 HANC metadata)

For more information, go to “Monitor” on page 61.

The HD-SDI output provides the formats described in the table below:

HD-SDI OUTPUT FORMATS

VIDEO FEED

FREQUENCY (HZ)

SMPTE STANDARD

720p 23.98, 24.00, 25.00, 29.97, 30.00, 50.00, 59.94 ST 292-1 (1.485 Gbps)

1080p 10-bit 4:2:2 23.98, 24.00, 25.00, 29.97, 30.00 ST 292-1 (1.485 Gbps)

1080p 10-bit 4:2:2 50.00, 59.94, 60.00 ST 424 (2.970 Gbps)

1. Ensure you select a frequency supported by your monitor.

2. The HD-SDI output is progressive scan (p); it does not support progressive segmented frame (PsF) or interlaced (i) scan formats.

3. The frequency options depend on project time base. If you have a non-drop frame project time base (such as 24.00), you can select

only non-drop frame frequencies. If you have a drop frame project time base (such as 23.98), you can select only drop frame frequencies.

75 OHM BNC CONNECTOR (HD-SDI)

PIN SIGNAL DESCRIPTION DIRECTION

Center HD-SDI SMPTE ST 424 HD-SDI Out

Shield/Screen GROUND Camera ground N/A

COMPATIBLE CABLE

 790-0341: RED HD-SDI Cable (6')

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 196 197

Sem comentários

RED DSMC V5.2 Especificações Página 175