Red DSMC FAN 2.0 UPGRADE Manual do Utilizador

DSMC FAN 2.0 UPGRADE KITRED.COMDSMC FAN 2.0UPGRADE INSTRUCTIONS

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 108. If the connector on your original fan assembly has a whi

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 11INSTALL 2.0 BOTTOM FANNOTE: If any of the fan bumpers fall

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 124. Insert the new fan assembly so that the fan bumpers are

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 136. Use a T10 Torx driver to install the two (2) M3x0.5 x 6

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 14TOP FAN COMPATIBILITYThe table below describes which top pla

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 15INSTALL TOP FAN WITH TOP VENT SCOOPREQUIRED TOOLS  T8 Torx

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 164. Remove the top vent scoop from the DSMC BRAIN.5. Use a

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 176. Remove the exhaust fan pogo cover.NOTE: Store the exhau

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 182. Attach the top fan to the DSMC BRAIN by installing two (

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 195. Attach the top vent scoop to the DSMC BRAIN by installi

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 2TABLE OF CONTENTSDisclaimer 3Copyright Notice 3Trademark Dis

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 20INSTALL TOP FAN WITH DSMC TACTICAL TOP PLATEREQUIRED TOOLS 

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 216. Remove the plate.7. Use a T6 Torx driver (included) to

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 228. Remove the exhaust fan pogo cover.NOTE: Store the exhaus

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 23INSTALL TOP FAN AND DSMC TACTICAL TOP PLATE 2.0NOTE: The to

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 246. Place the DSMC TACTICAL TOP PLATE 2.0 on top of the fan.

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 259. Use a 3mm Allen wrench to tighten the four (4) M4 screw

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 26RED recommends that you upgrade your DSMC firmware to v4.0.1

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 27ADJUST FAN SETTINGSAfter installing the 2.0 fans and perfor

RED DIGITAL CINEMACOPYRIGHT© 2014 RED.COM, INC.All trademarks, trade names, logos, icons, images, written material, code and product names used in ass

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 3COMPLIANCE STATEMENTSINDUSTRIAL CANADA EMISSION COMPLIANCE S

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 4  AS/NZS 61000.3.3 – Power Line FlickerJAPAN STATEMENTSThis

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 5SAFETY INSTRUCTIONS  DO NOT use the camera or accessories n

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 6INTRODUCTIONRED Digital Cinema now offers the DSMC FAN 2.0 Up

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 7DSMC FAN 2.0 UPGRADE KIT COMPONENTSDSMC FAN 2.0 UPGRADE KIT

COPYRIGHT © 2014 RED.COM, INC DSMC FAN 2.0 UPGRADE INSTRUCTIONS 955-0012, REV-D | 8REQUIRED TOOLS  T10 Torx driver  ESD-safe solder stick (inc

DSMC FAN 2.0 UPGRADE INSTRUCTIONSCOPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 95. Remove the fan grill by rotating it upward, using the ES