Red ONE 1.8 SSD MODULE Manual do Utilizador descarregar pdf (Página 9)

INSTALLING RED ONE 1.8” SSD MODULE

1. Carefully connect the Serial ATA and e-SATA connectors to the RED ONE 1.8” SSD Module.

NOTE: Connectors are installed in the opposite direction as when connected to the CF Module.

2. Place the RED ONE 1.8” SSD Module on the RED ONE camera body.

CAUTION: Ensure the harnesses are not pinched or damaged during installation.

3. Install the existing Allen Screw Lock Washers (4) onto the NEW Allen Screws (4).

4. Install all four (4) Allen Screws and washers into the RED ONE 1.8” SSD Module finger-tight.

Carefully Plug In

Both Connectors

Install Allen Screws

and Washers

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Red ONE 1.8 SSD MODULE Manual do Utilizador Página 9